28
SECURE DOOR PANEL
5
6
Recheck all gaps and any clashing.
Open the door and loosen the lower
bracket screw. Adjust the bracket until it
rests against the door panel. Re-tighten
the screw and fit an additional screw to
secure to panel.
Install kit E
Locate the shorter door trim to the
hinge-side of the product, and slide
down to clip in place. If a gap is present,
remove and readjust the side brackets.
Fit the top cover using two screws.
Ensure flat side faces out from
the panel.
Locate the longer door trim to the non-
hinge-side of the product and slide
down to clip in place. If a gap is present,
remove and readjust the side brackets.
Ensure trim does not protrude above
the top cover.
1
2
3
4
FIT TRIMS AND GRILLE
Hinge swap installs only:
Swap the bottom hinge and non-hinge
trims on the grille.
Summary of Contents for RS6019F2L
Page 2: ......
