27
ALIGN DOOR PANEL
SECURE DOOR PANEL
Locate the top of the door to the two
mounting screws and lower.
We recommend loading the shelves in
the door with 15kg weights to ensure
accurate panel gap widths.
Using a piece of tape, fit a tab on the
door to assist in opening the door
without disturbing panel settings.
1
2
3
4
Ensure top mounting screws have
been loosened and sit at their
lowest position.
Install kit D
Ensure side brackets are disengaged
and the top mounting screws have
been loosened. Rotate the mounting
studs clockwise to lower the panel and
anticlockwise to raise it.
Push panel side-to-side to adjust
horizontally. Ensure panels are flush with
front of cabinet.
1
2
3
4
Loosely tighten the side screws and the
top M8 washers using the spanner and L
key provided in the install kit.
Install kit D
Fit side screws to panel using the short
crosshead tool provided in the install
kit. For 90° door opening installs, the
supplied crosshead key should be used
on the hinge-side.
Tighten all side screws and the top M8
washer and nut to secure.
Install kit D
Summary of Contents for RS6019F2L
Page 2: ......
