Fisher & Paykel RS6019F2L, Installation Manual

Page: 15 / 35

15
DOOR CLEARANCES
RS6019S2R1 / RS6019S3RH1 Refrigerator with Stainless Steel Panels
RD6019, Handle Kit AHD5RDSF and Stainless Steel Toe Kick Panel
AKRS06010
Left hand hinge is a mirrored version of the image shown.
Left hand hinge can be achieved using supplied parts.
RS6019F2L1 / RS6019F3LJ1 Freezer with Stainless Steel Panels RD6019,
Handle Kit AHD5RDSF & Stainless Steel Toe Kick Panel AKRS06010
Clearance Dimensions mm
a
Depth of door (90° open, measured from front of cabinetry) 600
B
Minimum door clearance to adjacent wall (90° – reduced
internal access)* **
80
C
Minimum door clearance to adjacent wall (115° – full
internal access)* **
273
D
Minimum cabinetry clearance from side of door panel to
adjacent wall (non hinge side)
4
E
Minimum clearance between products when opening hinge to
hinge. Allowing both doors to open at the same time**
100
Minimum Door Clearance (Vertical Gap) mm
F
Dual Install:
•
Stainless steel door panels (gaps equalized
during installation)
5
• Custom panels (width of custom panel increased to
maintain 4mm gap across multiple products)***
4
G
Triple Install:
• Stainless steel door panels (gaps equalized
during installation)
6
• Custom panels (width of custom panel increased to
maintain 4mm gap across multiple products)***
4
* Use hinge limiting pin to restrict door opening to 90° where necessary
** Minimum dimensions shown are for the contemporary handle kit AHD5RDSF.
Custom panel and handle details need to be taken into account.
*** Refer to ‘Custom panel dimensions’ and Multiple Install pages for
further details.
D
A
B
WALL WALL WALL
C
F F F F F F
G G G G G G G G
E
HINGE TO HINGE
Both doors open at the same time
- requires space between models
HINGE TO HINGE
Only allows a single door open at a time
INDICATES CAVITY CLEARANCES
INDICATES PRODUCT DATUM
CLEARANCES CONSIDERATIONS
DUAL INSTALL
TRIPLE INSTALL