6
Installation Instructions
Water Supply
■
For best operating conditions your hot water should be approximately 65˚C. Your hot water
should not exceed 75˚C or your cold water exceed 35˚C. Temperatures above these may cause
the machine to fault or cause damage to the machine.
■
If you have an uncontrolled water-heating source (eg a wet back or solar heating) you should
have a tempering device fitted. This will ensure the hot water temperature remains within
safe limits. For the most suitable type of tempering device we recommend you contact a local
plumber or plumbing supply merchant.
■
Inlet water pressure: Max. 1MPa (150 psi) Min. 34Pa (5 psi)
■
Inlet water flow rate: Min. 3 litres/min
■
Minimum height of taps to clear the top of the machine is 1150mm.
Draining
■
Regularly check that your standpipe or tub is free from lint or other obstructions, which may
affect how your machine works or may cause flooding.
■
In multi-storey apartments or any upper floor, the machine should be installed on a drained floor.
■
Draining must comply with local by-laws.
Autowasher Safety
■
This autowasher is not intended for use by young children or infirm persons without supervision.
■
Your
Intuitive
™ can be opened while it is filling and agitating. Please supervise young children to
ensure they do not play with it.
CAUTION!
If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet
box), ensure that it is positioned so that it does not come into contact with water or moisture.
Accessories and Spare Parts
Available from your Fisher & Paykel Dealer or Authorised Service Centre.
Inlet Valve Cap
Part No. 388491
Hose Inlet Long (2m)
Part No. 422680
Hose Inlet Large Bore
Part No. 426123
Drain Hose Extension
Part No. 425627p
Power Cord
If the Power Cord of your autowasher is damaged it must be
replaced by a Fisher & Paykel Authorised Service Centre, as it is not
a standard power cord.
Summary of Contents for Intuitive eco IW512
Page 39: ......