4
Pull hose
through guide
20mm
maximum
Flex hose
guide apart
Standpipe 850 – 1200mm
Installation Instructions
Unpacking
To ensure the best performance from your new
Intuitive
™
washer please follow the instructions below.
Removing the Packaging
1
Remove the outer packaging.
2
Tilt the machine backwards and walk it off the bottom
packer one foot at a time.
3
Remove the bottom packer from under the machine by
pulling it out the front.
4
Lift the lid and remove the bowl packer from the bowl.
5
Remove the hoses and accessories.
6
Keep the bottom packer and bowl packer in case they
are required for future transit.
Please ensure that the bottom packer has been removed before operating your machine.
Installation
In your autowasher you will find:
■
4 rubber inserts for levelling feet (joined together).
■
1 hose guide.
■
2 white inlet hoses.
Drain hose
1
Carefully pull the black drain hose out from the
back of the machine by pulling the exposed part
of the hose downwards and outwards.
2
To guide the drain hose over the tub or standpipe
the hose guide MUST be fitted to the drain hose.
To Prevent Siphoning:
The drain hose should not extend more than
20mm from the end of the guide.
The height of the standpipe or tub should be
between 850 – 1200mm.
The drain hose can be trimmed to length.
3
Place the drain hose in the tub or standpipe.
Summary of Contents for Intuitive eco IW512
Page 39: ......
