17
The Options
7. Drip Dry
Pressing
DRIP DRY
will pause the washer at the end of the rinse, allowing you to remove
drip-dry garments before the washer goes into final spin. The washer will beep and display a
message to tell you that it is waiting for another instruction. Once items have been removed,
press
START/PAUSE
to begin the spin.
8. Max Spin Speed
This option allows you to change the auto sensing spin speed from fast (1000rpm) down to
medium (670rpm).
9. Water Levels
Your
Intuitive
™ washer can automatically select the right water level
for the load. As your machine fills it will pause occasionally to sense
the water level. The machine will check if the water level is correct
by using a series of 2 different agitate strokes: a slow stroke to sense
the load, and an agitate stroke to mix the load (this may take over
a minute). If it detects that the water level is not high enough it
will fill with more water and recheck the level. Your washer may
occasionally add water during agitation. This is to maintain the water
level due to the release of air trapped in the garments.
For some loads you may want to manually select the water level.
When washing an unusual load, such as large bulky garments or
pillows, we recommend you manually set the water level or use the
DUVET/DOONA
lifecycle.
If you wish to choose your water level use the marks on the agitator
to guide you. The mark nearest to the top of the clothes indicates
the water level you should select. The levels marked on the agitator
are a guide for the dry clothes and do not correspond exactly to the
water level. Selecting a water level that is too high can cause out of
balance loads, tangling or splash-over.
If there is already water in your
Intuitive
™ before you start your wash
there may be a short pause before it starts washing. Depending
on the amount of water in the bowl it may automatically start the
detergent activating wash (without adding any more water) or move
straight to the agitation wash if there is a lot of water in the bowl.
10. Traditional Wash*
Your
Intuitive Eco
™ washer can be set to a ‘traditional’ top loading wash, where the clothes
are agitated in a bowl full of water at temperature you have selected. (Traditional wash is the
conventional wash that the
Smart Drive
™ uses).
*Available on
Intuitive Eco
™ models.
Summary of Contents for Intuitive eco IW512
Page 39: ......
