manualshive.com logo in svg

Fisher & Paykel CLEANSMART WL8O60P, Installation Manual

Share
Download
Fisher & Paykel CLEANSMART WL8O60P Installation Manual Download Page 35

35

CHANGING PRE-SET OPTIONS

Automatic recovery ON

Your washer will try to automatically correct the out of balance load. It will fill with water 
and agitate to redistribute the load before trying to spin up again.

To change the out of balance (OOB) recovery routine: 

1

Factory Reset

Wash Temp

OOB Recovery

EOC Beeps

Enter Option Adjustment mode, refer to the 
‘Option Adjustment mode’  for instructions.

Select the 

DELICATE

 cycle.

2

Factory Reset

Wash Temp

OOB Recovery

EOC Beeps

Touch 

MORE

   or 

LESS

   to increase or 

decrease the number of beeps, or for no 
beeps to sound at the end of the cycle.

End of cycle beeps

The beeps signalling the end of the cycle can be increased or decreased. The default 
setting is 5 beeps. 

 

To modify the number of beeps sounding at the end of the cycle:

1

Factory Reset

EOC Beeps

Wash Temp

OOB Recovery

Enter Option Adjustment mode, refer to the 
‘Option Adjustment mode’ for instructions.

Select the 

SHEETS

 cycle.

Summary of Contents for CLEANSMART WL8O60P





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands