25
WASH OPTIONS
COLD TAP
CONTROLLED
COLD
WARM / COLD
WARM
WARM / HOT
HOT
Incoming water
from tap
20°C
35°C
40°C
50°C
60°C
Once you have selected your wash cycle you may wish to change the default wash options.
High Efficiency
This option lets you choose between a High Efficiency (ie High Efficiency On) and
Conventional (ie High Efficiency Off) mode of washing. Some cycles can be used in either
of the modes, or only one, depending on what is best for your clothes, refer to ‘The unique
CleanSmart™ wash.’
Simply touch the
WASH TEMP
button to increase or decrease the wash temperature.
Wash Temp
Your CleanSmart™ washer offers 5 wash temperatures, and an additional setting,
CONTROLLED COLD
.
Note:
z
The temperature option selected determines the temperature of the detergent activating
wash (with the exception of the
ALLERGY
cycle where both parts of the wash are hot).
z
Some temperatures are not available on some cycles as a safeguard for your clothes
(eg
HOT
and
WARM / HOT
on the
DELICATE
cycle).
Hint: If a hot wash is required, where both phases of the wash system are hot, you must
select the
ALLERGY
cycle, or the
SHEETS
cycle and
HOT
temperature.
Controlled Cold
The temperature of cold tap water varies widely, depending on your location and the
season. The lower the cold water temperature, the less effective the cold wash becomes. To
help with this issue we have developed
CONTROLLED COLD
which adds a small amount of
warm water, when necessary, to raise your cold water wash to approximately 20°C. This will
ensure that you receive a more effective wash in cold water. Cold Tap (
) is the default
COLD
setting on your washer. If you wish to use the
CONTROLLED COLD
setting as the default
COLD
setting, refer to ‘Changing pre-set options’ section to learn how to change the default
setting.
Soil Level
Your clothes and other washable items sometimes need more or less cleaning than others.
The
SOIL LEVEL
option lets you adjust the wash to suit the amount of soil in your load. For
example, for dirty clothes, select
HEAVY
and for items that are only lightly soiled, select
LIGHT
. This adjusts the wash time accordingly to give the load the right amount of agitation
in order to remove the soil.
