Fisher & Paykel Aerotech OD302M, User Manual

Page: 39 / 48

37
Using the SELF CLEAN mode
1
Remove oven shelves, shelf supports (see ‘Cleaning’) and all other cookware/utensils from the
oven before using the SELF CLEAN mode.
2
Select the SELF CLEAN mode by turning the oven mode dial.
3
Turn the temperature dial to its maximum position.
will appear in the display and this
will change to
when the cycle begins. The
DOOR LOCK
and
CLEAN
symbols will show in the
clock display and the time remaining will count down.
For your safety the door lock will automatically activate once the SELF CLEAN mode and
temperature have been selected.
4
At the end of a self-clean cycle, the door will unlock and the
DOOR LOCK
symbol will disappear.
The
CLEAN
symbol and
will flash in the clock display and
SELF CLEAN
will show in the mode
display until the oven is returned to manual operation – to do this turn the oven mode and
temperature dials to OFF.
5
At the completion of the self-clean cycle, you will notice grey ash deposited inside the oven.
The amount of ash in the oven is dependent on the amount of soil present in the oven before
it was cleaned. When the oven is completely cooled, the ash is easily removed with a small
brush or dry cloth, then wipe out the oven with a clean damp cloth and dry with a clean
lint-free cloth.
6
Replace the shelf supports (see ‘Cleaning’) and oven shelves.
To cancel the SELF CLEAN mode before it has finished
Turn the oven mode and temperature dials to OFF.
CLEAN COOL
will appear in the oven mode
display and the door will remain locked until
CLEAN END
appears.
Important!
Do not turn off the mains power supply to the oven. The fans are needed to cool the
oven.
Once the oven is cool or below the safe temperature it will return to normal operation and the
clock display will show the time of day.
Short SELF CLEAN cycle
A shorter self-clean cycle can be selected if the oven is only lightly soiled:
1
Select the SELF CLEAN mode by turning the oven mode dial.
2
Turn the temperature dial to its maximum position. will appear in the display.
3
While is showing press the
CO O K
T I M E
button. The CO O K
T I M E
and
AUTO
symbols and the colon will
flash.
4
Rotate the
P U S H TO
C L E A R
button to reduce the time: this can be anywhere between two and
three hours.
5
Press the
CO O K
T I M E
button again, or wait eight seconds to adopt the setting and start the self-
clean cycle. The clock display will show the time remaining.