Fisher & Paykel Aerotech OD302M, User Manual

Page: 24 / 48

22
USER SELECT options
USER SELECT mode
USER SELECT mode allows you to configure some of the settings displayed on your AeroTech®
oven control panel.
How to enter USER SELECT mode
1
Be sure that the oven mode and temperature dials are off, that no automatic/delayed start
programs are operating and that the clock is displaying the correct time of day.
2
Press the then the button and hold down
together until the oven ‘beeps’ (about two seconds). The oven
mode display will show
.
Sabbath mode
This mode is designed for religious faiths that observe a ‘no work’ requirement on the
Sabbath.
When your oven is in Sabbath mode
Clock, temperature and oven mode displays will be disabled.
No tones will sound.
No error messages or temperature changes will be displayed. However, temperature can be
adjusted.
The cavity lights are on if the door is open when Sabbath mode is set. The cavity lights are
off if the door is closed when Sabbath mode is set.
How to set Sabbath mode
1
Enter the USER SELECT mode and turn the oven mode dial
clockwise until the display shows .
2
Select the length of time you wish to stay in by rotating
the
P U S H TO
C L E A R
button. The maximum is 99 hours, in one hour
steps, and is shown in the clock display. Select a temperature.
BAKE is the only oven mode available in Sabbath mode.
3
To start Sabbath mode, press the
P U S H TO
C L E A R
button. The oven mode display will show
with no backlight. The temperature display will show ; temperatures can be adjusted but
the display will not change.
Oven mode
display
Oven mode
display