15
B
l u e t o o t h
C
o n t r o l
S
e t
o
p e r a t i n g
m a n u a l
1 The Bluetooth Control Set
Now the wide variety of functions from fischertechnik models can be controlled even more easily
using the fischertechnik Bluetooth remote control.
The set consists of a high-performance transmitter, a microprocessor controlled receiver and a
servo. The receiver is installed directly in the model and connect up to three motors or lamps and
a servo to it. The speed of the motors and the servo deflection can be regulated infinitely.
The range of the transmitter is over 10 metres.
Please absolutely observe the safety instructions in Chapter 13!
2 Coupling the transmitter with the receiver (pairing)
At the first commissioning the transmitter and receiver must be coupled with each other. This
process is called "pairing" in Bluetooth terminology.
Procedure:
1. Place the 9 V block battery (not included in scope of delivery) in the battery compartment of
the transmitter (1).
2. Connect the receiver with a fischertechnik 9 V power supply via the two fischertechnik sockets
(8) (9 V battery holder, rechargeable battery pack or power pack, not included in scope of
delivery). Afterwards the blue LED on the receiver flashes (about 1x per second).
3. Switch on the transmitter via the ON button (2). The blue LED also flashes 1x per second.
4. Press the Select button on the transmitter approx. 3 sec., until the blue LED flashes rapidly
(about 4x per second). Afterwards release the button and press the Select button on the
receiver until the blue LED on the both the transmitter and the receiver are lit continuously.
Now both are paired with each other and can exchange data.
This process only has to be performed once. Afterwards the devices detect each other automatically
and connect as soon as both are switched on. One detects that the transmitter and receiver are
connected to each other by the continuously lit blue LEDs.
