FISCHER PRO-LINE DE90, Operating Manual

Page: 32 / 116

5 | Operation FISCHER Mess- und Regeltechnik GmbH
32 BA_EN_DE90
\...\Designation
1 2 3 4
M
M N O P Q R D L K J I H B
easuring point
U
û
Cursor Select field
Symbol list
Fig. 38: Editing text
In this display, the cursor is controlled with the button
û
. The cursor can only
be moved right. It is not possible to move back. If the cursor is moved to the
edge, the display for selecting the action (see above) is displayed again.
Text is processed with the select field in combination with the latest cursor posi-
tion. The button
ÿ
moves the list of characters
(3)
to the left and the button
þ
moves it to the right. If the right sign is shown in the select field, these can be
accepted with the button
û
at the cursor position. The cursor moves one char-
acter to the right and the next character position can be edited.
5.1.5.2 Value input
For example: Directory: \Configuration\ Channel 1\ Measurement C1\ Meas.range C1 start
Ms.range C1 start
1 2 3 4
OK Cancel Edit
-100.000
Pa
U
Ms.range C1 start
1 2 3 4
-100.000
Pa
-100.000 100.000
1
U
û
Limit (Min.)
Pointer
Bargraph
Limit (Max.)
Cursor
Fig. 39: Input of number values 1st place
þ
ÿ
Fig. 40: Setting a figure
Partial input
The number value can be entered position by position from left to right. The but-
tons
ÿ
and
þ
are used to set the numbers 0 … 9. The sign can be changed
automatically by selecting the running direction. The limit values determined
from the device configuration cannot be undercut or exceeded. One of the set
digits ca be accepted with the button
û
and the cursor moves one position fur-
ther to the right. The running direction of the cursor is defined and cannot be
changed.
(3)
The list of characters comprises the characters of the character set Windows 1252 (Latin 1 and
Latin 9)