FISCHER PRO-LINE DE90 Operating Manual Download Page 42

Page: 42 / 116

5 | Operation

FISCHER Mess- und Regeltechnik GmbH

BA_EN_DE90

Menu name

Description

Meas.range C1 end

The end of the measuring range of the
1st measuring channel is defined with
this parameter.

Damping C1

This parameter can be used to set a
damping for the 1st measuring chan-
nel.

Meas.range C2 unit

A defined unit for the 2nd measuring
channel can be selected in this sub-
menu.

Meas.range C2 start

The start of the measuring range of the
2nd measuring channel is defined with
this parameter.

Meas.range C2 end

The end of the measuring range of the
2nd measuring channel is defined with
this parameter.

Damping C2

This parameter can be used to set a
damping for the 2nd measuring chan-
nel.

Back

This represents the output (exit) of the
quick access menu. Press 'back' to re-
turn to the main menu.

Signpost [►Page]

•

•

•

•

Meas.range C1 start [

•

•

As all channels are configured identically, only the first channel is described.
This is why the links for the second channel are missing.

Summary of Contents for PRO-LINE DE90





















































































































Search results

Summary of Contents for PRO-LINE DE90

Reviews:

Related manuals for PRO-LINE DE90

Brands by name

Popular brands

FISCHER PRO-LINE DE90, Operating Manual

Search results

Summary of Contents for PRO-LINE DE90

Reviews:

Related manuals for PRO-LINE DE90

Brands by name

Popular brands