Brief Guide FMP10 / FMP20
Page 5
Description of the Instrument
3.2
Control Panel Key Functions
Hourglass: Measurements are currently not possible because
an instrument-internal routine is running.
...SCOPE ...
FKA...
Information lines:
Instrument type
Instrument-internal software version
Key
Function
DEL
z
Deletes the last measured reading
z
Returns to the previous menu or
z
Cancels the procedure
FINAL-RES
Retrieves the final result
ON/OFF
Turns the instrument on and off
ZERO
Retrieves the normalization
CAL
Retrieves the corrective calibration
∧
z
Changes the information shown on the LCD display.
z
The display will change faster if
∧
is pressed for longer than
3 seconds.
∨
z
Changes the information shown on the LCD display.
z
Turns the “free-running” display mode on/off.
z
The display will change faster if
∨
is pressed for longer than
3 seconds.
SEND
Transfers the values to a connected computer.
ENTER
Confirms entries
5 x ENTER: Calls the service functions
The instrument settings in the
Service Functions
menu are
password-protected. “157” will be displayed after pressing EN-
TER 5 times. Press
∧
2 times to increase this value to the fac-
tory-default
password
“159” and confirm the entry with
ENTER.
Display
element
Explanation
