FISCHER DELTASCOPE FMP10, Operator'S Manual, Page: 13 / 23

Page 10 Brief Guide FMP10 / FMP20
System Setup
Measurement Method of the Connected Probe
Turning Off the Instrument
Press the
ON/OFF
key to turn the instrument off manually.
The instrument shuts down automatically if for about 5 minutes no measurements
are made or no key is pressed.
Display Explanation
[
„
NF/Fe] Magnetic induction probe connected.
[
†
NC/NF] Eddy current probe connected
[NF/Fe NC/NF] Dual probe connected and dual method [both] set (i.e., in
the open application, both measurement methods can be
used to make measurements).
[
„
NF/Fe NC/NF] Dual probe connected and dual method [NF/Fe] set (i.e.,
in the open Application, only the magnetic induction meth-
od can be used to make measurements). Or: The probe
was last placed on an Fe base material.
[NF/Fe
†
NC/NF] Dual probe connected and dual method [NC/NF] set (i.e.,
in the open Application, only the eddy current method can
be used to make measurements).
Or: The probe was last placed on an NF base material.