![fisair DFRIGO Series User Manual Download Page 39](http://html1.mh-extra.com/html/fisair/dfrigo-series/dfrigo-series_user-manual_2294097039.webp)
DFRIGO User Manual |
Document subject to change without prior notice.
39
The unit has a remote signalling card SEF-013 with three relays (NC-NA) with which can be
obtained these remote status signals. This card is located inside the unit's electrical board,
in connection block X1.
Rx1. Remote relay indicating "unit is live"
Rx2. Remote relay indicating "running"
Rx3. Remote relay indicating "defect/alarm"
For information about your electrical connection see page 7 of the electrical schematics.
8.5
Configuration menu
If you have chosen to operate in automatic mode, you must select one of the three pre-set
configurations for operating the dehumidifier from the configuration menu (CONF).
For detailed information on the configurations.
see section 8.3.
Selection of "S" stages configuration
Selection of "P" proportional configuration
Selection of configuration by measurement signal "M”