DFRIGO User Manual |
Document subject to change without prior notice.
38
8.4
Initial state
Having fulfilled the conditions for installation, checked that the network values match those
required for the machine and having made all of the electrical connections in accordance with
the control application:
Switch on isolator (I1), and the following will appear on the control panel:
Initial state OK.
MAN -0- AUTO
Signalling card SEF-008
Remote signalling card
SEF-013
Initial state NOT OK.
MAN -0- AUTO
Signalling card SEF-008
Remote signalling card
SEF-013
On the signalling card SEF-008
lights up yellow, indicating that the unit is "live".
If there is any alarm/defect/fault in the unit,
will also light up red, indicating “warning”.
When the unit is switched on,
lights up green, which indicates that the unit is
“running”.
WARNING!!!
Do not switch on the unit without first reading sections 8.5 and 8.6.
Rx2
Rx3
Rx1
Rx1
Rx2
Rx3
