5
STEP 6:
After 10 seconds of no valid remote codes being transmitted the CM will
automatically exit programming mode
NOTE:
If no valid remotes are programmed the CM will enter valet mode.
**parking lights will flash twice signaling the end of programming mode.
Battery Charging
The 2WT13R-SF is a waterproof USB rechargeable remote. Use the micro USB cable included in the
remote pack with a USB adapter or computer charging port to charge you remote battery. USB adapters
rated at 2.5A or higher are not recommended. Unregulated 12 volt (car charger) USB charging cables are
not recommended.
2WT13 / 2WR5
:
First, locate the micro USB port on the top of your remote. Connect your micro USB cable to the power
adapter and plug into wall outlet.
-The 2WT13 display will show the charging ICON to indicate it is charging.
-if the remote is powered off while charging, a single tap of the center button will display the remote
battery voltage
-The LEDs on the front of the R5 will flash red showing that your remote is charging.
Both remotes will beep to indicate charging is complete, this should take approximately 2 hours. You
should expect 30-45 days of battery life with normal use.
NOTE: if the remotes battery dies before you
can connect it to a charger you will need to power the remote back up once charging is complete
