15
2WR5 LED Icon guide
LED Icon
Description
Will flash when transmitting to indicating the lock/arm command has been sent
Will flash + beep confirming the system has been locked/armed
Will flash + beep when transmitting to indicating the unlock/disarm command has been
sent
Will flash + beep confirming the system has been unlocked disarmed
Will flash + beep indicating the remote start command has been sent.
Will flash + beep confirming the system has been remote started/stopped
Will flash + beep when the remote receives an alarm trigger alert
All 4 icons will flash during remote start to act as a runtime count down timer. Each icon
represents 25% of the runtime and will stop flashing as timer counts down starting with the
lock LED. The remote will beep 3 times when 1 minute of runtime left. During the last minute
of runtime, the remote will beep 1 time/2 seconds
Remote Start Error Diagnostic
If the remote start fails to start the vehicle, the parking lights will flash three times immediately.
Following those three flashes the parking lights will flash again corresponding to the error table.
Number of
Parking Light
Flashes
Remote Start Error
1
Motor running or must program tach before 1st remote
start
2
Key in ignition on position
3
Door open (manual transmission only)
5
Foot brake on
6
Hood open
7
Reservation off (manual transmission only)
8
Tach or Tachless sensing failure
9
DAS sensor shutdown
10
System is in Valet Mode
2 Way remotes will display the error number “Start Err##” on the LCD.
