11
Shock Sensor:
(ONLY if equipped) This will activate or deactivate any sensor connected to the shock
sensor ports on the Firstech system.
2
nd
Car Mode:
The 2WT13 can be programmed and control 2 separate vehicles as long as they both
have the same model of antenna (ANT-2WSF). This feature will allow the user to switch between
vehicles as needed.
NOTE: In order to program the remote to car 2 the 2
nd
car mode must be set to 2
nd
car.
Drive lock:
Your Firstech system is capable of locking/unlocking the vehicle doors once the ignition is
on, doors are closed, and the foot brake is pressed. (may not apply to all vehicles)
NOTE: this feature
must also be enabled on the Firstech CM in order for the user to control it.
This user feature will activate
or deactivate the ignition controlled door locking function (or drive lock). Once activated the doors
should lock once the vehicle is running, the doors close, and the foot brake is pressed. They should
unlock when the vehicle is shut off or parking brake is set (only if connected to the CM).
Timer Start:
This will activate or deactivate the user feature Timer Start.
Timer start is a User function
that when enabled will automatically start the vehicle based on the time sequence or temperature
selected by the install tech at the time of installation. This is also a feature that is required to be enabled
on the Firstech CM in order for the remote to activate or deactivate it.
Screen Time out:
This will change the length of time the LCD screen stays awake during use.
NOTE: a
longer screen time may reduce battery life between charges.
Display Brightness:
This remote feature will increase or decrease the LCD screen brightness, there are
3 levels to adjust.
NOTE: The brighter screen options may reduce battery life between charges.
Remote Chime Volume:
This remote feature will allow the user to adjust the volume of the sounds the
remote makes while in use.
NOTE: There is a vibrate (which will only vibrate, no sound) and there is an
off which will disable all sounds and vibration.
Turbo Timer:
This user feature will activate or deactivate the Turbo Timer function. The Firstech system
has a built in turbo timer option
(not all Firstech systems are capable of Turbo Timer, please consult with
your install tech for confirmation)
which will leave the vehicle running for up to 3 minutes
(based on turbo
timer option selected by the install tech)
using the remote start portion of the
system (if equipped) by
engaging the parking brake (must be connected to the CM)
, removing the key, and exiting the vehicle.
NOTE: The Turbo Timer feature must be enabled on the CM by the install tech at the time of installation,
