20
Camera status
Once the camera is properly powered up by following the steps of section 7, the system boots and C-
RED 3 is ready to operate.
A purple diode signal, visible on the rear face of the camera, confirms the operability.
Camera status
Camera’s led color
Description
Starting
Blue
Camera starting
Configuring
Blue
Camera configuration is applied
Operational
Purple
Camera is operational
Safe
Red double blink
The camera detects an error. The detector is
turned off. To be able to reuse the camera, you
must restart it.
Prevsafe
Yellow
Locked
Red
The camera detects a critical error. The camera is
unusable, please contact First Light Imaging for
support.
Safe (rescue FW)
Orange double blink The camera detects a critical error. The camera is
unusable, please contact First Light Imaging for
support.
Note: turned off led does not necessary mean that there is an issue with the camera. Indeed, the
camera can be configured to switch off the led automatically once boot is completed.
