50
For convenience, it is possible to enable/disable optional features without removing the corresponding
license file.
Disabling of a license is done using the “
exec disablelicense
” command. Reenabling is done using
the “
exec enablelicense
” command.
Note: When a license file is uploaded into the camera, it is enabled by default.
List of the currently installed licenses files and their status can be retrieved using the ‘
licenses’
command.
Note: uploading, enabling, disabling or removing a license require a camera reboot to be effective.
Below are some examples of license management commands:
fli-cli>licenses
hdr.lic
OK
fli-cli>exec disablelicense hdr.lic
OK
fli-cli>licenses
hdr.lic.disabled
OK
fli-cli>exec enablelicense hdr.lic
OK
fli-cli>licenses
hdr.lic
OK
fli-cli>
Camera advanced settings
Dark level adjustment
Vref adjustment parameter is used to set automatically the best black level.
However, it is possible to set it manually.
To do so, set vrefadjust parameter to off
‘set vrefadjust off’
and use the command
‘set
voltage vref [1.9-2.3]’
to manually set the black level.
Integration time granularity
Integration time granularity is set to a value providing the best performances by default.
However, for very short integration time, this granularity can be too large.
