17
7. SETTING UP AND START UP CAMERA
Connecting your camera
Each step below can be realized independently of one another in any order.
Power FISCHER CONNECTORS cable connection
The provided power supply/FISCHER CONNECTORS cable described in section 6.3.1 is connected to
the back of the camera and connected to the line plug.
First, plug the FISCHER CONNECTORS power connector to the camera, then plug the
power unit to the line plug.
Figure 7:
C-RED 3 with power supply connected thanks to the FISCHER CONNECTORS connector.
Camera Link
®
connection (for C-RED 3 CL only)
The Camera Link
®
connectors can be plugged and fastened in any order but reversing the order will
prevent camera operation. The Camera Link
®
connections can be plugged or unplugged either if the
camera is ON or OFF.
