11
Completing The Viking 2 AR assembly
Do not cut
Bungee tie wrap
before Bungee
cord is attached
to rear of rower
as shown here.
Pull Bungee Cord and hook Bungee end
onto the Bungee hook mount as shown.
Once the Bungee cord is attached to the Rear
Brace, tighten the bolts holding the Footboard,
the Mainframe to Side rail bolts as they are
easier to access from the vertical position.
Lower the VIKING 2 back to the Horizontal
position and test for proper bungee recoil.
Check Seat rollers/running boards for dirt or
debris before sitting on the rower seat. Small
objects captured between the seat rollers and
runners can damage the wheels or running
surface. Check runners for debris prior to each
use and clean
regularly.
Note: The VIKING 2 frame bolts require
periodic checking for tightness. Do this at the
end of the first month of use and again after
every 12 months
Choose a suitable location when standing the
product for storage.
The VIKING 2 frame can be polished with any
high grade furniture polish to further highlight
the rich luster of the wood finish.
Install supplied 2x AA Duracell batteries and
check computer function. Details
regarding can be found in the Computer sec-
tion of this manual.
Choose a flat, level surface on which to use
your Viking 2 AR Rower, to avoid rocking and
potential premature wear.
Cut Bungee tie wrap ONLY after Bungee hook is
properly connected to Rear Brace.
Tighten
frame bolts
securely
once rower
is standing.
