15
Calibration Procedure
(Power Zone & UBE Series
)
1. Turn the Adjuster Handle to
LEVEL 2
Monitor now will display LEVEL
『
2
』
1. Turn the Adjuster Handle on the tank to LEVEL 2.
2. Then press
『
RESET
』.
Display will show
『
3
』
on the LEVEL, which mean Calibration is
complete for LEVEL 2.
2. Press RESET to complete the
Calibration for LEVEL 2
Repeat STEP 2~3
until 10 LEVEL setting is completed
Turn Handle from 1 to 10, noting correct monitor reading. If any
fault occurs begin again at STEP 1
