4
E-216 Assembly Instructions
Step 1.
Remove contents from box, and lay Upper
Frame (tank assembly) on its back. Tilt slightly to one
side and allow transport wheels to drop into position.
Secure with M8x35mmbolt. Repeat on opposite side.
1
Step 2.
Attach Lower Frame to Upper Frame
with center bolt (M10x70mm bolt, standard
washer and spring washer) but
do not tighten
.
2
M10x70mm bolt, standard
washer and spring washer
Lower Frame
Lower Frame
See steps 2 and 3 to attach Lower and
Upper Frame
Upper Frame
Step 3
. Install left and right side bolts
(M10x90mm bolt, standard washer and
spring washer). Tighten all three.
3
Do not attempt to stand rower until
footplate is attached. See
following page for details
WARNING
Summary of Contents for E-216 Fluid Rower
Page 1: ...Owners Manual ...
