E-7
If the unit is not to be used for an extended period of time, remove the batteries. Old or
leaking batteries can cause damage to the unit and may void the warranty.
Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture (Follow battery manufacturer’s directions).
Do not dispose of batteries in fire, batteries may explode or leak.
MOUNTING THE DESKTOP STAND
Two different mounting options are available for the DESKTOP STAND. Insert the stand into
the corresponding slots on the bottom of the telephone for a more comfortable viewing angle.
OPTION A will tilt the phone at a 49 degree angle, and OPTION B is at a 30 degree angle.
ATTACHING THE STAND
1.
Place the main unit, keypad side down on a soft stable surface.
2.
For OPTION A (49 degree angle), refer to the following diagram:
Align and insert the “A” tabs on the stand into the wider openings of the DESKTOP
STAND MOUNTING SLOTS located on the bottom of the SFA3275.
When the hooks are properly inserted, carefully slide the DESKTOP STAND forward
with both hands until it reaches the end of the slots and locks into place.
3.
Turn the unit over, and place it on a firm flat surface.
Note:
The same procedures applies for mounting OPTION B (30 degree angle), just align and
insert the “B” tabs on the stand into the base.
DETACHING THE STAND
1.
Place the main unit, keypad side down on a soft stable surface.
2.
To remove the STAND for either mounting option, refer to the following diagram:
Carefully slide the DESKTOP STAND backward horizontally as shown with both hands
until it aligns with the wider openings of the DESKTOP STAND MOUNTING SLOTS.
Carefully pull the STAND out of the base openings.
