background image

E-17

You may have too many extensions on your line. Try unplugging a few devices. Having
too many telephones and/or accessories can also create problems such as low ringer
volume or impaired quality during calls.

Noise, Static, Interferences while using the handset

A filter may be required for homes with DSL line or near Radio towers.

Caller ID information does not show

Make sure you have subscribed to Call

er ID service through your local phone

company.

CARE AND MAINTENANCE

1.

Clean your phone with a damp (never wet) cloth. Solvent or detergent should never be
used.

2.

If your phone stops working, check to be certain that all modular plugs are properly
“snapped” into their jacks.

3.

If the phone still doesn’t work and you have other telephones installed in your home,
check to see if they are working. If they are, try using your telephone on another outlet. If
it still doesn’t work, it is more than likely that there is a problem with your telephone. In
this case, return the unit for service in accordance with the instructions on your warranty
card. DO NOT CALL THE TELEPHONE COMPANY SINCE YOU MAY BE
RESPONSIBLE FOR CHARGES FROM THEM. CHARGES FROM THE TELEPHONE
COMPANY ARE NOT COVERED BY THE TERMS AND CONDITIONS OF THE
WARRANTY.

4.

If other telephones in your house have also stopped working, the problem is most likely
with your telephone line service. Do not return your telephone for service since most
likely there is nothing wrong with it. You should however, consult with your telephone
company to see if there has been any interruption to your line service.

5.

If it is determined that your telephone is malfunctioning, FCC requires that it be
disconnected from the modular outlet until the problem has been corrected.

6.

Always have your unit repaired by an experienced technician or return it for service to
address listed in

WARRANTY AND SERVICE

section.

© 2014 BRK Brands Inc. All rights reserved. First Alert® is a registered
trademark of the First Alert Trust.

At Spectra, environmental and
social responsibility is a core
value of our business. We are
dedicated to continuous
implementation of responsible
initiatives with an aim to
conserve and maintain the
environment through
responsible recycling.

Please visit us at http://www.spectraintl.com/green.htm for more information on

Spectra’s green initiatives or to find a recycler in your area.

Summary of Contents for SFA3275





















Reviews: