Firex Cucimix UCBTE C V1 Series Installation And Operation Manual Download Page 9 | Manualshive

Page: 9 / 80

background image

SAFETY

01-UDBRG_V1-DIMU-00-EN

9

2.2

WARNINGS

All installation and maintenance work must only be carried out by a company
belonging to the relevant industry register.

Fire protection regulations must be strictly adhered to.

The machine should be serviced at least once a year to ensure it is in prime
condition

. Therefore, it is recommended to sign a maintenance contract with a reliable

technical support centre.

The appliance can only be used for cooking food in industrial kitchens.

Any other use is

considered improper use and, therefore, dangerous.
Intended for commercial use only. Not for household use.

The appliances should only be used by personnel trained to use them.
The appliance must be operated under close supervision.

Keep the appliance area free and clear of combustible materials.

Do not attempt to operate this unit in the event of a power failure.

Do not obstruct the flow of combustion and ventilation air.

Respect a 5 minute complete shuttoff period before the appliance is relighted.

Any damage caused by water/steam infiltration or insects, due to the machine
panels not being closed (after installation or maintenance) shall void any warranty
claims.

The manufacturer assumes no responsibility for injuries or damage due to non-
compliance with safety regulations or improper use of the appliance by the
operator.

The appliance is not intended to be used by persons (including children) with
reduced physical, sensory or mental abilities, or lack of experience or knowledge,
unless they are supervised, by someone responsible for their safety, or given

instructions regarding the use of the appliance.
Children should be supervised at all times so that they do not play with the
appliance.

«
...
7
8
9
10
11
...
»

Summary of Contents for Cucimix UCBTE C V1 Series

















































































Reviews:

No comments

Related manuals for Cucimix UCBTE C V1 Series

Brand: Jade Pages: 53

Brand: Omega Pages: 6

Brand: Healthy Choice Pages: 19

Brand: Omcan Pages: 12

Brand: FAR Pages: 49

Brand: Koenic Pages: 98

Brand: Sunbeam Pages: 9

Brand: Kalorik Pages: 20

Brand: Thermador Pages: 1

Brand: SEVERIN Pages: 38

For butter infusion

Brand: Butter Brewer Pages: 12

Brand: LIVING COLLECTION Pages: 42

Brand: Waldorf Pages: 29

Brand: Jenn-Air Pages: 24

Brand: Indesit Pages: 48

Brand: Frigidaire Pages: 2

FEC30S6AB - on 30" Smoothtop Electric Cooktop

Brand: Frigidaire Pages: 2

FEC30C4AB - Frig 30 Electric Cooktop

Brand: Frigidaire Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands