Firex Cucimix UCBTE C V1 Series Installation And Operation Manual Download Page 24

Page: 24 / 80

01-UDBRG_V1-DIMU-00-EN

TRANSPORT, STORAGE, UNPACKING

5.2

STORAGE

Store the appliance in a closed environment protected against atmospheric agents.
Keep the appliance away from humidity and temperature ranges

Protect the appliance from shocks and stresses

Ensure that the appliance is in contact with corrosive substances

5.3

RECEIPT AND UNPACKING

Upon receipt of the machine check that the packaging is undamaged. If it does not withdraw
the conditional commodity producing photographic evidence of any apparent damage.

After removing the packaging, check that the appliance is undamaged.In case of

visible damage, do not connect the appliance but contact the sales outlet
immediately.

Check for the presence of individual components with packing lists.

Remove from the panels of the machine the protective film PVC .

Before disposing of the packaging materials

make sure that they do not contain machine

elements

(accessory; tools; documentation, etc)

Dispose of the packaging components in accordance with the regulations in force on
waste disposal.

Summary of Contents for Cucimix UCBTE C V1 Series

















































































Search results

Summary of Contents for Cucimix UCBTE C V1 Series

Reviews:

Related manuals for Cucimix UCBTE C V1 Series

Brands by name

Popular brands

Firex Cucimix UCBTE C V1 Series, Installation And Operation Manual

Search results

Summary of Contents for Cucimix UCBTE C V1 Series

Reviews:

Related manuals for Cucimix UCBTE C V1 Series

Brands by name

Popular brands