9
STEP 2:
Remove 1/2” flared fittings from
each end of 1/2” flex line.
STEP 3A: (FOR MATCH LIT SYSTEM)
Connect one of your 1/2” flared fittings removed in
Step 2 to the ½” coupling located on the bottom
of the aluminum plate with flared end on bottom.
Tighten.
Apply thread
sealant here
Plate
Coupling
Flared Fitting
STEP 3D
STEP 3D: (PREMIUM 24 VOLT IGNITION)
Coupling
Flared
Fitting
Premium 24 Volt
Ignition
Drip Leg
Plate
Apply thread
sealant here
STEP 3C
STEP 3C: (STANDARD 24 VOLT IGNITION)
Coupling
Standard 24 Volt
Ignition
Flared
Fitting
Drip Leg
Plate
Apply thread
sealant here
STEP 3B
STEP 3B: (3 VOLT IGNITION)
Coupling
3 Volt Ignition
Flared
Fitting
Drip Leg
Plate
Apply thread
sealant here
60K – 120K BTU System with FLKV12
Flared Fitting
Flex Line
