background image

3

GENERAL INFORMATION
Carefully follow the instructions in this manual to prevent personal injury or 

property loss. Instructions are updated as needed. It is the installer’s respon-

sibility to periodically review instructions for applicable updates. 
WARNING: This Owner’s Manual contains critical information for the safe 

installation and operation of the fire features listed in this manual.  All instruc-

tions must be strictly followed for safe installation and operation.  Warranty is 

void if not followed.
WARNING: It is the installer’s responsibility to ensure a safe installation and 

to educate the end user as to proper operation. Installer must leave this 

manual with the end user. 
WARNING: We suggest that our products be installed by professionals 

that are locally licensed by the authority having jurisdiction in gas piping. 

We suggest that our products be serviced annually by a licensed plumber.  

Installer must follow all instructions carefully to ensure proper performance 

and safety. Warming Trends

TM

 is not responsible for your actions. 

WARNING: Never alter product or configuration in any way.  Alterations can 

damage the product and cause harm to the end user.  Warranty is void if any 

modification is made to product.
WARNING: FOR REMOTE CONTROL USE: To prevent accidental startup 

from unwanted Remote Control signals it is the responsibility of the end user 

to turn off power to electric outlet for the remote-control receiver when the 

fire-pit is not in use via wall switch or breaker. 
WARNING: Product is not intended to be a starter for wood or other combus-

tibles. 

PARTS LIST FOR CERTIFIED MODELS

CROSS

FIRE

TM

 BRASS BURNER MATCH LIT SYSTEMS

Model # CFB60LP: CFB60LP burner, plate or pan, lava rock

Model # CFB60NG:  CFB60NG burner, plate or pan, lava rock

Model # CFB120LP:  CFB120LP burner, plate or pan, lava rock, gas reducing orifice

Model # CFB120NG:  CFB120NG burner, plate or pan, lava rock, gas reducing orifice

Model # CFB180LP:  CFB180LP burner, plate or pan, lava rock, gas reducing orifice

Model # CFB180NG: CFB180NG burner, plate or pan, lava rock, gas reducing orifice

Model # CFB290LP: CFB290LP burner, plate or pan, lava rock, gas reducing orifice

Model # CFB290NG:  CFB290NG burner, plate or pan, lava rock, gas reducing orifice

CROSS

FIRE

TM

  BRASS BURNER 3V BATTERY OPERATED SYSTEMS

Model # CFB60LP-3VIK:  CFB60LP burner, plate or pan, lava rock, 3 Volt Battery Operated Electronic Ignition System

Model # CFB60NG-3VIK: CFB60NG burner, plate or pan, lava rock, 3 Volt Battery Operated Electronic Ignition System 

Model # CFB120LP-3VIK: CFB120LP burner, plate or pan, lava rock, 3 Volt Battery Operated Electronic Ignition System

Model # CFB120NG-3VIK: CFB120NG burner, plate or pan, lava rock, 3 Volt Battery Operated Electronic Ignition System 

CROSS

FIRE

TM

  BRASS BURNER 24 VOLT ELECTRONIC IGNITION SYSTEMS – Premium - Standard Capacity

Model # CFB60LP-P24VIKSC:  CFB60LP, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system

Model # CFB60NG-P24VIKSC:  CFB60NG, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system

Model # CFB120LP-P24VIKSC:  CFB120LP, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

Model # CFB120NG-P24VIKSC: CFB120NG, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

Model # CFB180LP-P24VIKSC: CFB180LP, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

Model # CFB180NG-P24VIKSC:  CFB180NG, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

Model # CFB290LP-P24VIKSC:  CFB290LP, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

Model # CFB290NG-P24VIKSC:  CFB290NG, plate or pan, lava rock, Premium 24 Volt standard capacity electronic ignition system 

CROSS

FIRE

TM

  BRASS BURNER 24 VOLT ELECTRONIC IGNITION SYSTEMS – Premium - High Capacity

Model # CFB300LP-P24VIKHC:  CFB300LP, plate or pan, lava rock, Premium 24 Volt high capacity electronic ignition system

Model # CFB300NG-P24VIKHC:  CFB300NG, plate or pan, lava rock, Premium 24 Volt high capacity electronic ignition system 

CROSS

FIRE

TM

  BRASS BURNER 24 VOLT ELECTRONIC IGNITION SYSTEMS – Standard - Standard Capacity

Model # CFB60LP-24VIKSC:  CFB60LP, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system

Model # CFB60NG-24VIKSC:  CFB60NG, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system 

Model # CFB120LP-24VIKSC:  CFB120LP, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system

Model # CFB120NG-24VIKSC:  CFB120NG, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system 

Model # CFB180LP-24VIKSC: CFB180LP, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system 

Model # CFB180NG-24VIKSC: CFB180NG, plate or pan, lava rock, Standard 24 Volt standard capacity electronic ignition system 

CROSS

FIRE

TM

  BRASS BURNER 24 VOLT ELECTRONIC IGNITION SYSTEMS – Standard - High Capacity

Model # CFB290LP-24VIKHC: CFB290LP, plate or pan, lava rock, Standard 24 Volt high capacity electronic ignition system 

Model # CFB290NG-24VIKHC: CFB290NG, plate or pan, lava rock, Standard 24 Volt high capacity electronic ignition system 

Model # CFB300LP-24VIKHC: CFB300LP, plate or pan, lava rock, Standard 24 Volt high capacity electronic ignition system  

Model # CFB300NG-24VIKHC: CFB300NG, plate or pan, lava rock, Standard 24 Volt high capacity electronic ignition system    

GENERAL WARNINGS

WARNING: YOU MUST READ OWNERS MANUAL IN ITS ENTIRETY PRI-

OR TO INSTALLATION AND/OR OPERATION. 
WARNING: FOR OUTDOOR USE ONLY. 
WARNING: Improper installation, adjustment, alteration, service, or 

maintenance can cause injury or property damage. Read the installation, 

operating, and maintenance instructions thoroughly before installing or 

servicing this equipment. 
WARNING: Do not store or use gasoline or other flammable vapors and 

liquids in vicinity of this or any other appliance. 
WARNING: LP-cylinder not connected for use shall not be stored in the 

vicinity of this appliance. 
WARNING: If you smell gas: 

•  Shut off gas to appliance. 
•  Extinguish any open flame. 
•  If gas odor continues, keep away from appliance and immediately

call gas supplier or fire department. 

Summary of Contents for CFB120





























Reviews: