Firepower FP 95 FC, Operating Manual & Installation Manual

Page: 3 / 52

!
WARNING
Read and understand this entire Manual and your employer’s safety practices before install-
ing, operating, or servicing the equipment.
While the information contained in this Manual represents the Manufacturer's best judgement,
the Manufacturer assumes no liability for its use.
Firepower FP 125, 135, 165 MIG/Flux Cored Welder
Operating Manual Number 0-5123
Published by:
ESAB
2800 Airport Rd.
Denton, TX 76208
www.Firepoweronline.com
Copyright 2015 by ESAB
All rights reserved.
Reproduction of this work, in whole or in part, without written permission of the publisher
is prohibited.
The publisher does not assume and hereby disclaims any liability to any party for any loss
or damage caused by any error or omission in this Manual, whether such error results from
negligence, accident, or any other cause.
For Printing Material Specification refer to document 47x1909
Original Publication Date: March 19, 2009
Revision Date: April 6, 2016
Record the following information for Warranty purposes:
Where Purchased:_______________________________ __________
Purchase Date:__________________________________ __________
Power Supply Serial #:___________________________ __________
Torch Serial #:___________________________________ __________