FireplaceXtrordinair 36 ELITE-ZC, Installation Manual

Page: 4 / 24

P
AGE
4
I
NSTALLATION
Installation Preparation
! Read this entire manual before installing the fireplace.
! Failure to install this fireplace in accordance with all local codes and the requirements listed in this
manual may result in property damage, bodily injury, or even death.
! Notify your insurance company before installing this fireplace.
! The requirements listed below are divided into sections. All requirements must be met
simultaneously. The order of installation is not rigid – the qualified installer should follow the
procedure best suited for the installation.
! Modifications of the fireplace (doors, blower, air inlet systems, damper control, or any other
component supplied by Travis Industries) or use of any component part not approved by Travis
Industries in combination with this fireplace system will void the listing and warranty.
Packing List
Shipped with the Fireplace:
• Installation Manual
• Grate
• Baffle
• Blower Assembly
• Ember Strip
• Log Retainer (includes allen wrench & instructions)
• Flex Duct w/ start collar – 3' Length, 6" Dia (For Blower)
• Two 10' Flex Ducts, 6" Diameter (For Cooling Vents)
• Two Vent Hoods (For Cooling Vents)
• Two Vent Hood Storm Collars (For Cooling Vents)
Shipped with the Faceplate:
• Faceplate (two switch plate screws are attached)
• Switch Plate (includes blower rheostat)
• 10 Faceplate Screws
Shipped with the Door(s):
• Owner's Manual
• Installation Hardware Pack
• Pair of Gloves
• Efficiency and Registration Cards
• Touch-up Paint
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
AAA
See the section
"Facing Requirements"
See the section "Blower
Electrical Connection"
See the section
"Mantel Requirements"
Insulation must not fill the
spaces between the stand-offs
See the section
"Fireplace
Placement
Requirements"
See the section
"Chimney Requirements"
See the section
"Hearth Requirements"
See the section
"Blower Duct Connection"
See the section
"Cooling Vent Installation"
See the section
"Minimum Framing
Dimensions"
18" Min.
Installation Overview