Firenzo Woodfires Kompact AG Series, Installation And Operation Manual

Page: 30 / 46

Kompact AG Installation—November 2018 30
Assembly and Installation Instructions:
KOMPACT with DECO Fascia
1. Remove door.
2. Place the single back plate of the fascia
against the firebox. Replace the 50mm
screws (2) in the outer clips of the fire box
securing the backplate.
Secure the top of the backplate with the
three 15mm self tapping screws (3).
1
2
2
3 3 3
4
3. Remove the granite ashlip from the fascia box
and fit below the door opening using the two
locator screws at the bottom of the firebox (Screws
for granite ashlip (3) see illustration (1).
These two screws protrude by 5mm to enable the
ashlip to be lifted up and over the screw heads and
then screw up tight.
Attach the bottom grill
2
Granite ashlip
5
Bottom grill
5
3
4. Place the keyhole brackets on the 3 plate Deco
fascia
over the protruding screws on the back plate
(Screws (5) illustration (2).
Fit the air control extension rod and the air control
knob.
Finally fit the door. Locate the hinges correctly by
angling the door at approximately 45 degrees.
3 plate Deco fascia
Air control rod and knob
Deco door