Linking
8
Dorgard X
2
is controlled by the System X transmitter and therefore requires Linking to it to
work.
System X transmits on a frequency of 2.4 GHz, channel hopping on 16 separate channels
which ensures zero interference with other products. System X will not transmit on a
channel where there is excessive noise or interference.
Each Dorgard X
2
and System X has an individual MAC addresses ensuring direct
association with each product. It also means that Dorgard X
2
will only communicate to the
specific System X it is Linked to, i.e. if a different System X transmitter in another building
enters self-test mode, only its Linked Dorgard X
2
units will respond.
Note. It is recommended the Dorgard X
2
units are Linked after installation of
the System X transmitter.
It is suggested that the Links are set with all units in close proximity of the
System X transmitter, prior to fitting to its door.
Summary of Contents for Dorgard X2
Page 1: ...Fitting and Operating Guide Cat A Cat B...
Page 35: ...34 Notes...
