Contact us for assistance: (866) 985-7877 |
www.balkenehome.com
ASSEMBLY
PREPARATION
5
D
Attach the gas cylinder brackets
5
to the base plate
6
: Align the gas cylinder brackets with the eyelets in the base
plate surrounding the large center hole. Fasten the gas cylinder brackets to the base plate using 3 short bolts
B
. Rotate
the vertical portion of the brackets toward the middle of the base plate. Tighten the short bolts using a wrench
H
.
回
Insert 3 long bolts
C
into the nuts welded onto the gas cylinder brackets eyelets. Do not tighten the long bolts
completely (this will be done in step 13 when securing the gas cylinder).
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list and hardware contents as listed on page 4 of this manual. If any part is missing or damaged, do
not attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME:
90 minutes
Tools Required for Assembly (NOT included):
• Adjustable crescent wrench
1
Hardware used: Short Bolt
B
x3, Long Bolt
C
x3
Hardware used: Bolt
A
x8
Attach 2 wheels
7
to the base plate
6
with 8 bolts
A
. Pay attention to the direction of the wheels when attaching.
Make sure the wheel brackets point towards the upper side of the base plate (the side where the gas cylinder brackets
are attached). For easier installation, turn the base plate over before attaching the wheels.
2
