background image

BEFORE YOU BEGIN

Contact us for assistance:  (866) 985-7877  |  

www.balkenehome.com

 

TABLE OF CONTENTS 

Before You Begin 

Page 2

Safety Information 

Page 3

Package Contents 

Page 4

Hardware Contents 

Page 4

Assembly 

Page 5-15

Operating Instructions 

Page 15-19

Care and Maintenance 

Page 20

Troubleshooting 

Page 21

Page 22

Warranty Information 

2

BEFORE YOU BEGIN

Please read and understand this entire manual before attempting to assemble, operate or install this 
appliance. If you have any questions regarding the product, please 

contact us:

This manual contains important information about the assembly, operation and maintenance of this patio 
heater. General safety information is presented in the first few pages and is also located throughout this 
manual. Keep this manual for future reference and to educate new users of this appliance. This manual 
should be read in conjunction with the labeling on the appliance. Safety precautions are essential when 
any mechanical or propane-fueled equipment is involved. These precautions are necessary when using, 
storing, and servicing. Using this appliance with the respect and caution demanded will reduce the 
possibilities of personal injury or property damage. The symbols shown 

in the

 "Safety Information" 

section 

are used extensively throughout this manual. Always heed these precautions, as they are essential when 
using any mechanical or propane-fueled equipment.

Call toll-free

 

Email

 

Live chat 

(866) 985-7877

9 a.m. – 9 p.m., EST.

[email protected]
www.

balkenehome

.com  9 a.m. – 

6

 p.m., EST., Monday - Friday

Summary of Contents for 63099























Reviews: