Programming
Master Programming Level
88
MS-5UD and MS-10UD Series Manual —
P/N 52626:B1 6/30/2009
3.5.5.4.3 Central Station
Central Station programming configures the control panel DACT for contacting the central
station. Pressing
3
while viewing Onboard DACT Screen 1 will cause the following screens to
be displayed:
3.5.5.4.3.1 Reporting
To enable the DACT for reporting FACP activity to the central station, press
1
while viewing
Central Station Screen #1 so the display reads
Reporting Yes
. Each press of the
1
key will
toggle the display between
Reporting Yes
and
Reporting No
.
3.5.5.4.3.2 Report Style
The DACT can be programmed to transmit reports to primary and/or secondary central station
phone numbers as a backup. Press
2
while viewing Central Station Screen #1 to display the
following screen:
Press
1
to have all reports transmitted to the central station secondary phone number as a
backup only if the primary phone line fails,
2
to transmit all reports to both the primary and
secondary phone numbers all of the time or
3
to send reports to the first available phone
number.
ON BOARD DACT
1=PRIM PHONE
2=SCND PHONE
3=CENTRAL STATION
Onboard DACT
CENTRAL STATION
1=REPORTING NO
2=REPORT STYLE
FIRST AVAILABLE
Central Station Screen #1
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=CALL LIMIT 0
Central Station Screen #2
REPORT STYLE
1=BACKUP ONLY
2=BOTH
3=FIRST AVAILABLE
Backup Reporting Screen
