Operating Instructions
Read Status
126
MS-5UD and MS-10UD Series Manual —
P/N 52626:B1 6/30/2009
4.19.11 Phone Line
Pressing
1
while viewing Read Status Screen #4 will display the following screen:
The second and third lines of this screen indicate that both the Primary and Secondary phone lines
have been configured for touchtone dialing operation.
Pressing
1
for
Superv Phone Line
will cause the following screen to be displayed:
This screen indicates whether or not Phone Line 2 is being supervised by the DACT. The factory
default setting is Phone Line 2 supervised (Yes).
4.19.12 Service Terminal
Pressing 3 while viewing Read Status Screen #4 will display the following screens:
The Ring Count is displayed as the first item in the Service Terminal Screen.
PHONE LINES
PRIMARY
TCH TNE
SECONDARY TCH TNE
3=SUPERV PHONE LINE
SUPERVISE PHONE LINE
PHONE LINE 2 YES
READ STATUS
1=CENTRAL STATION
2=PHONE LINES
3=SERVICE TERMINAL
Read Status Screen #4
SERVICE TERMINAL
RING COUNT
Service Terminal Screen
