INSTANT
BYPASS
Bypasses are performed to eliminate burglary zones that are
The INSTANT mode arms the system and eliminates the entry
not ready or faulty from activating the security
System.
time delay interval. If anyone enters through an entry/exit zone the
alarm system will instantly activate.
BYPASS PROCEDURE:
BYPASS [USER] ZN
The system must be ready to select the INSTANT option.
INSTANT PROCEDURE
INSTANT [USER]
Depress the BYPASS key followed by your user code and the two
digit zone number to be bypassed.
The zone number to be bypassed is shown as ZN. For example,
to bypass zone number 2 enter;
BYPASS [USER] 02
Depress the INSTANT key followed by your user code.
Upon sucessful INSTANT ARMING of the system the ARMED
and INSTANT indicators will be lit.
Note: The INSTANT option will automatically be reset after the
system is disarmed.
INSTANT - STAY
The INSTANT STAY mode will arm the system with the
characteristics of both the INSTANT and STAY modes. The system
will be armed with the interior portions bypassed and the entry
delay will be suspended.
The system must be READY in order to enter this mode.
PROCEDURE
INSTANT STAY [USER]
STAY INSTANT [USER]
Depress the INSTANT and STAY keys in any order followed by
your user code.
After a sucessful INSTANT STAY arming the ARMED, INSTANT
9
and STAY indicators will be lit.
Multiple zones may be bypassed by repeating the sequence for
the desired number of zones within a fifteen second interval, as
follows;
EXAMPLE: BYPASS [USER] 02 BYPASS 04 BYPASS 12
The sequence displayed above would have bypassed zones 2,
4 and 12.
Zones can be bypassed if the user performing the bypass is
authorized to perform bypasses and the zone has been defined by
your installer as bypassable.
If the zone has already been bypassed, the sequence will
unbypass the zone except if the system is armed and the
unbypassed zone is still not ready. Unbypass means that the zone
returns as an active burglary zone.
After the bypass (or unbypass) command has been accepted
the unit will emit a continuous beep and zone or zones that have
been bypassed will appear in a slow blinking mode in the zone
status area.
>>
Note: Bypassing can be performed either while the system is
armed or disarmed.
10
Summary of Contents for LEGEND series
Page 1: ......
