Fire Burglary Instruments LEGEND series Owner'S Manual Download Page 2

Page: 2 / 9

INTRODUCTION

Congratulations on your decision to protect your home or

business with the LEGEND Security System. The system has been
designed with reliability and ease of operation in mind.

Please take a few minutes to review the contents of this manual.

In order to realize the full potential of this system it is important that

you feel comfortable with its operation. The following pages will
familiarize you with the procedures for operating the LEGEND
Security System.

Thank You,

FIRE BURGLARY INSTRUMENTS

LEGEND Users Manual

Table of Contents

Introduction ............................................. 1

Keypad Layout ....................................... 3

System Operation ................................... 6

Arming ....................................... 7

Stay

..........................................

Instant ........................................ 9

Instant-Stay ............................... 9

Bypass ...................................... 10

Forced Arming .......................... 11

Unbypass ................................. 11

Disarming ................................. 12

Keypad Emergency Conditions.. 13

User Definition ........................................ 15

Glossary .................................................. 17

Owners Information ................................ 19

About the Manufacturer ........................ 21

Additional Notes ..................................... 24

Summary of Contents for LEGEND series










Search results

Summary of Contents for LEGEND series

Reviews:

Related manuals for LEGEND series

Brands by name

Popular brands

Fire Burglary Instruments LEGEND series, Owner'S Manual

Search results

Summary of Contents for LEGEND series

Reviews:

Related manuals for LEGEND series

Brands by name

Popular brands