KEYPAD OPERATION
2- LOW BATTERY
The keypad contains everything necessary to operate your
LEGEND Security System. The keypad has the following
appearance;
13
14
LED KEYPAD LAYOUT
\
1 - ZONE STATUS
7
The indicator lights marked 1-16 display the current status of
the zones connected to your LEGEND Security System. The lights
show whether any zones are currently in alarm, bypassed, in
trouble or faulted status. Note: If your system contains eight zones
then only the zones labelled 1-6 will be active.
The status of each zone is represented as follows;
ALARM
Fast Blinking
TROUBLE
Slow Pulse
BYPASSED
NOT READY
Slow low Intensity blinking
Solid ON
Each light will only reflect one condition at a time. If a zone
contains multiple conditions at the same time the highest priority
status from the above list will appear.
The BAT indicator indicates that the backup battery within the
system is low.
3- STAY
The STAY light will be ON when the system has been armed in
the stay mode which means that the system has been activated
with the exception of interior zones.
4- READY INDICATOR
The light marked RDY shows whether the system is ready fo be
armed. If the light is off then a condition exists within at least one
of the zones which prevents the system from being armed.
5- COMMUNICATIONS FAILURE
If the COM light is ON then there has been a communications
error with the Central Station.
6- INSTANT
The INS indicator will be ON when the system has been armed
in the INSTANT mode. This means that the system has been
activated and the entry delay has been eliminated.
7- NUMERICAL SECTION
The numerical section of the keypad operates similar to a
calculator or typewriter. The digits 0 - 9 are clearly marked and are
used to enter your access code to control the Security System.
8- PULL OPEN DOOR
The front of the keypad contains a door which pulls open.
Behind this door is a card which can be filled out to describe the
areas protected (zones) of your Security System.
4
Summary of Contents for LEGEND series
Page 1: ......
