USER DEFINITION
USER DEFINITION PROCEDURE:
CODE [USER][US#][US#][USlD][USlD][LEV][LEV]
Users can be entered or modified directly through the keypad. where;
The LEGEND Security system can maintain up to sixteen different
[USER]
Is your four digit
user code.
users. The capability to modify user information is initially
programmed by your alarm installer. If there are any questions
[US#]
User sequence number (01-16).
[USID]
New user ID (0000 - 9999).
regarding this feature, please contact your installation company.
[LEV]
Authorlzatlon
level (l-4).
Each of the users have the following features;
USER NUMBER
Sequence number identifying the user being modified or
entered. User number 1 is considered the highest level user
capable of performing all functions. The user numbers range from
01 to 16.
USER ID
Four digit code (0000 - 9999) entered at the keypad to
use the Security System. Each separate user must be assigned a
unique
user code. The user ID has been displayed as [USER]
throughout this manual.
AUTHORIZATION LEVEL
The LEGEND control panel contains authorization levels to
control the users permitted to perform various system functions.
This allows users to be restricted to certain functions. The levels
are shown below;
LEVEL1-ARM, DISARM, BYPASS, PROGRAM USERS
LEVEL2-ARM, DISARM, BYPASS
LEVEL3-ARM
LEVEL4-DISARM only (temporary user)
For example, a maid or babysitter can be assigned a
temporary access code that would only permit them to arm or
disarm the system (level 3 or level 4). User sequence number
(01-16).
Note: The user information is entered twice for validation purposes.
>>
USER DEFINITION CAN ONLY BE PERFORMED BY A
USER WITH A LEVEL ONE AUTHORITY.
Example,
To create user number 3, with a user access code of 4567, and
a user level of 2 enter;
CODE [USER] 03 03 4667 4567 2 2
Any error detected during the USER definition process will
cause the keypad to beep rapidly four times. If an error is
detected retry the
entire command.
15
16
16
Summary of Contents for LEGEND series
Page 1: ......
