Fiori DB 260, Use And Maintenance Manual

Page: 125 / 226

125
5
MAINTENANCE
id.: DB 260 REV. 00 01/07/2015
5.8.3 REPLACING THE OIL IN THE FRONT AND REAR AXLES (fi g. 8)
- Park the vehicle on level ground, turn off the engine, apply the parking brake, lower the arm and remove the
ignition key.
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
8
3
7
4
6
6
5
5
2
1
1
- Position two pans under the front and rear axles by the draining caps.
- Unscrew the draining caps ( 1 ), ( 2 ) and ( 3 ). Position the cap ( 3 ) at the bottom by turning the planetary
reduction gear.
- Unscrew the level gauge cap ( 4 ) and ( 5 ).
- Drain out all the oil and screw the draining caps ( 1 ) and ( 2 ) back on.
- Turn back the planetary reduction gear so that the plug ( 3 ) is in the position as shown in the fi gure. Using a
funnel, add the required type of oil until reaching the optimal level.
- Unscrew the fi ller cap ( 6 ) and ( 7 ).
- Using a funnel, add the required type of oil through the fi ller cap ( 6 ) and ( 7 ) until oil trickles from the hole in
the level gauges ( 4 ) and ( 5 ).