
98
4
OPERATION AND USE
id.:
DB 260 REV. 00 01/07/2015
4.10.5 FIRST FILLING WITH MIXING WATER
4.10.5.a Filling the tanks with mixing water
(fi g. 32)
CAUTION: In the event of pump failure, check that there is water in the pump body (see chapter
4.3.3).
- Fill with water through the water inlet pipe
To
fi ll the tank, use an external water source introducing water through the hole
L
.
You
can
fi ll from both water tanks positioned opposite each other as they are connected.
- Filling with water using the transfer pump
CAUTION: Check that the pre-fi lter is fi tted inside the fi ller neck A of the pump, and always use the
fi lter F during suction from water sources, since the pump may take in small parts that
could damage the pump propeller.
- Remove the closing cap
C
checking that the pre-fi lter is fi tted
,
insert the fl exible suction hose
E
into the
suction pipe fi ller neck
A
of the pump.
- Insert the tube leading to the tank into the delivery fi ller neck
H
.
- Move the valve
B
to the correct position (with delivery to tank 2).
- Position the fl exible suction hose
E
in the relative water source (reservoir, external tank, ditch etc.).
- Open both covers
L
to prevent the water tank from swelling.
- Check that the suction fi lter
F
is completely immersed (the maximum difference in height from the union
A
must be 4-5 m).
- Start the engine.
- Activate the transfer pump (engine rpm ideally about 2000).
- Wait until the tank is full (when water starts fl owing from the water inlet pipe and from the tank).
- Stop the transfer pump and close the cover
L
.
CAUTION: The pump automatically stops when the water tanks are full.
32
E
H
B
F
L
1
2
A C
Summary of Contents for DB 260
