19
vacuum motor maintenance
The vacuum motors must be checked and cleaned. The brush must be checked every six months and
replaced, if required.
1.
Remove the key from the dashboard and the motor cover guard on the back of the machine.
2.
Release the hooks and disconnect the plug to free the motors (fig. 11)
3.
Free and remove the sponge filter underneath the motors, wash it and put it back.
4.
Check the suction blower from the hole in front of the vacuum motor.
5.
Check the brushes by removing the plastic cap, loosen the screws (fig. 12) and remove the two
plastic supports of the carbons
6.
Now perform the operation in reverse order
Fig. 11
Fig. 12
Any maintenance or repair operation not described in the routine maintenance must be
carried out by specialised personnel authorised by FIORENTINI
1.
vacuum motor
2.
frame fixing knobs
3.
vacuum motor fixing
hooks
1.
cap
2.
brushes
3.
brush screws
Summary of Contents for I 42TE
Page 10: ...10 Forward boards Fig 3 ...
