16
17
HOW TO KEEP YOUR OvEN IN SHAPE
Before cleaning your oven, or performing maintenance, disconnect it from the power supply. To extend the life of
your oven, it must be cleaned frequently, keeping in mind that:
The enameled or stainless steel parts should be washed with lukewarm water without using any abrasive powders or
corrosive substances which could ruin them ;Stainless steel could get stained .If these stains are difficult to re
-
move, use special products available on the market. After cleaning, it is advisable to rinse thoroughly and dry.
The inside of the oven should preferably be cleaned immediately after use ,when it is still warm ,with hot water and
soap ;The soap should be rinsed away and the interior dried thoroughly. Avoid using abrasive detergents (for ex- am-
ple
cleaning powders, etc) and abrasive sponges for dishes or acids (such as lime scale –remover, etc…) as these could
damage the enamel .If the grease spots and dirt are particularly tough to remove, use a special product for oven clean-
ing, following the instructions provided on the packet. Never use a steam cleaner for cleaning inside of oven.
If you use your oven for an extended period of time ,condensation may form .Dry it using a soft cloth.
There is a rubber seal surrounding the oven opening which guarantees its perfect functioning .Check the con-
dition of this seal on a regular basis .If necessary, clean it and avoid using abrasive products or objects to do so.
Should it become damaged, please contacts you’re nearest After-sales Service Center .We recommend you avoid
using the oven until it has been repaired.
Never line the oven bottom with aluminum foil ,as the consequent accumulation of heat could compromise the
cooking and even damage the enamel .
Clean the glass door using non-abrasive products or sponges and dry it with a soft cloth .
UNHOOKING THE DOORS.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method according
to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on the
clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always remember
to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the oven after
replacing the bulb.
UNHOOKING THE DOORS.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method according
to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on the
clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always remember
to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the oven after
replacing the bulb.
