14
15
AUTOMATIC SETTING
1 Press button, set roast time;
2 2.Press button, set roast finish time;
3. Set temperatures and roast modes by turning the thermostat knob and selector knob.
After the above setting, “AUTO”will be glittering, which means the roast process of the oven is set.
For example
: if roast time takes 45 minutes and expect it will end at 14:00.
After the above setting, the screen shows the real time(hour minute)and flashing“AUTO”,it means the set roast
process is memorized automatically.
When the clock turns to be 13:15(or between 13:14-13:15), the oven will start automatically.
In the roast time, and“AUTO”will be always flashing.
When the clock turns to be 14, the roast has been finished automatically. The alarm will ring and“AUTO” will
flash, press the button and the ringing will stop.
SEMI-AUTOMATIC SETTING
A.
Set the time limit of roast (10 hours maximum): Press the button to set the time of roast;
B.
Set the time of ending (23 hours 59 minutes maximum): Press the button to set the time of ending;
The oven starts immediately, and “AUTO” will flash. When the set time of ending is reached, the roast process
will shut automatically. Then“AUTO”flashes, the alarm rings. The ringing will stop after the button is Pressed.
When the related button is pressed, the set roast process will be displayed. Whenever the button is pressed, and
set backward the time to “0”,the set roast process will be cancelled. When button is pressed again, the oven
will revert to the manual operation process.
TIMER
The longest time frame can be set is 23 hours and 59 minutes. For setting time, press the function button repeated-
ly until the square symbol above “ ” flashes, and press “+” or “-” button until the time supposed shows on the
display. After setting, the proper time (hour, minute) and the square symbol above the “ ” begins to flash.
In addition, the time countdown begins to work. When it reaches the set time, the square symbol above the “ ”
flashes, and the alarm will ring, the square symbol will flash, To stop the ringing press any button.
Notice: press the relevant button, the setting must be carried out in 5 seconds; if electricity failure suddenly, all the
set procedure and the proper clock time (hour, minute) will disappear.
After electrical power is on again, “12:00” and the square symbol above “ ” will show on the display, you need to
set it again .
COOLING AND vENTILATION
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan, which comes on
automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
