Fiore FI1000 Series, Installation And Operating Instructions Manual

Page: 17 / 26

16 17
UNHOOKING THE DOORS
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method according
to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on the
clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
REPLACING THE OvEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always remem-
ber to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the oven after
replacing the bulb.
UNHOOKING THE DOORS.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method according
to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on the
clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always remember
to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the oven after
replacing the bulb.
UNHOOKING THE DOORS.
For a more thorough clean,you have to remove the oven door.Choose the removal and assemble method according
to different structure of oven door purchased.
Proceed as follows:
Open the door fully;
Lift up and turn the small levers located on the two hinges;
Grip the door on the two external sides and close it approximately half way.Unlock the door by pressing on the
clamps F,then pull the door towards you lifting it out of its seat.To replace the door,reverse this sequence.
REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, Always remember
to use high temperatures (300/ E14) bulb for the oven. Reassemble the glass cap and reconnect the oven after
replacing the bulb.
THE OvEN LIGHT
Set knob “B”to the symbol to turn it on .It lights the oven and stays on when any of the electrical heating ele-
ments in the oven come on